htm01
-
Posts
1,189 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by htm01
-
in #4 he's cutting on the right side in the other 3 it's left you also selected the 3rd entity 3 times
-
can't right now, ill try later
-
should work but you'll need to break it up so you have the same # of segments top and bottom
-
worked with a guy that we called 50% Bauer, because the first thing he did when he came in was turn speed and feed to 50%
-
if you have solidworks try parasolid (.X_T) file but roll back to version 14 in options
-
note pad has goto also
-
open in mastercam or cimco editor or you'll have to count lines
-
only if they use the right tool. me: why didn't you use the 1/8" sharp point tool that i gave you with the set-up sheet? op: i already had a 1/4" with a .01 flat on it set up
-
How to engrave sequential serial numbers
htm01 replied to themachinist's topic in Machining, Tools, Cutting & Probing
-
i usually skip a year if there is nothing major, been doing odd years
-
i agree, every time i finally get used to a version a new one comes out and its start all over, not just MC but all software. I don't believe we need a new version just because the date changes, in the early days it was years between.
-
yeah i went to CNC and downloaded it
-
i get a push notice from MC
-
i set auto save every 60min and after every op, also backup with just the name "bob"
-
and cadkey, i'm surprised some F keys still work
-
put common stuff in right mouse button
-
click the arrow top right by your name - account settings - signature
-
had to be V2, i still have a pc with V3 on it, you could only machine 1 surface at a time, had to do some creative trimming back then
-
v5 multisurf, i would set it up to crunch overnight only to have it run out of memory and would have to break it up into 2 or 3 programs
-
only select the operations that you want on the setup sheet
-
good to know, never used that c-hook, always used migration update
-
you'll need to use a few different versions, x5 or x6 is the last that will do v9.1, then you will need x8 or x9, 2018 will convert from there
-
when i don't know the flat i program to Z0. and tell them to adjust at machine
-
IMG_20181024_124650553.bmp
-
when i select arc center and just select the circle it is grayed out, but if i select the same circle with arc center but a little "e" shows on curser i can type in dia
