X+ for X2 MR2

[Carl Hessig]

Thanks Gunther, the snapshot is a great addition to an already great chook.

[gw]

Thanks

[Tom R]

Thank you this is awesome and fast! I was wondering if there is a way to get it to only show one tool which would be the deepest (expl. tool3 z-.500 and in another path the same tool goes down z-1.000 so the set up sheet only shows the z-1.000)

 

Thanks again!

[Zoober]

Tom, If you are using the excel template, you can parse through any of the info you wish to. You can build macros that control any of the info that X+ brings in.

 

For example, after my op list is brought in, I populate my tool list worksheet, then sort by tool # and delete any redundant tool info. Nice and clean.

 

Here's a sample........HTH

 

 

[neil qwerty]

I notiiced that the "stock left" rounds out to 2 decimal places, for example, if I leave .008" the setup sheet shows .01. Is there any way to change this?

 

Thanks,

Neil.

[Zoober]

Again, setup your .xlt file cell formatting to the # of decimals you want.

[Günther Massimo - GMCCS]

Neil,

change the number format in your windows-system-control. X+ uses that settings.

[David Perron]

Everyone sounds so excited. What is this thing that Gunther created? Is it a setup sheet?

 

 

X2 MR1 SP1

[shazam/TPP]

Gunther, where is the windows-system control?

[Zoober]

Control panel---> regional and language options--->customize button

 

HTH

[shazam/TPP]

ty robert

[neil qwerty]

Thanks Gunther and Robert! Never would have figured that one out.

[Zoober]

[Chipmakr]

Günther thank you for the new update. I have missed this application very much. I actually just installed MR2 a few days ago beacause I was waiting for this to come out.

 

THANKS AGAIN

[wfcPain]

Works Great

 

[ 11-12-2007, 03:37 PM: Message edited by: wfcPain ]

[Programinator]

Thanks man now im going to look cool with my nice setup paper work

[Ying Jiang]

Great tool! Thanks as always!

[crazy^millman]

A General Bump for those that have not got this great tool.

[Thee Rickster ™]

A horrendous Bump for those that have not got this great tool.

[Midwest]

Thanks

 

 

[doyleg]

Thanks here too!!!

[litnin]

Thnx. Great tool.