#Rekd™
-
Posts
2,925 -
Joined
-
Last visited
-
Days Won
48
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by #Rekd™
-
Where are you located?
-
Supercar 2006, Who is your Mastercam re-seller?
-
Greg, Try to create surfaces from the solid (on a new level) then extend the surface. John
-
Send my a large shirt please!
-
I would like to add that all Cad/Cam software that I have seen or used have some sort of issues. I am sure CNC software is aware of what is out there and how much these programs cost. I think JP is correct in saying that putting down Mastercam on this forum will not make anything better IMHO. Sure if you have a bug or problem go to it but if you are here to promote another software I think the line is being crossed. I can say from experience that In-House Solutions tech support is light years ahead of the NX GTAC. John
-
You can also convert your solids to surfaces (on another level) and machine from the surfaces. John
-
It may have changed but when it first came out it did not have all of the toolpaths that MC did at that point.
-
Marshal, I don't see a benefit of it IMHO, it is limited. John
-
Edwinristcnc, Mail. John
-
Send the file over and let me have a look.
-
Brad, You are one of the few guys here that will know anything about UHV parts and welds!!! We build custom made UHV chambers and parts here, there are 3 of us whom do the welding. Good luck in your search!
-
That is funny... not a chance! I live in Milton but work downtown here in TO.
-
I would try and eliminate a lot of the roughing (surface tool paths) and replace them with pockets and or contours where ever possible. Then do your surfaces.
-
Chall, I don't have my sim with me at home to look at the file. Always use 2d toolpaths when ever possible. I like to work from surfaces as opposed to working from a solid. John
-
another solidworks file to convert, please
#Rekd™ replied to Jeff the haas_guy's topic in Industrial Forum
Jeff, Mail. John -
another solidworks file to convert, please
#Rekd™ replied to Jeff the haas_guy's topic in Industrial Forum
I viewed it in edrawings and I would redraw this in MC. John -
What are they worth?
-
Hi John, Stupid question but did you check all of the levels?
-
Does Catia make a cam software or is it an add on to the cad software?
-
I would think holding that tolerance will be an issue over that length.
-
+1000 on the verification software.
-
+1000 to Colin!
-
Bump
-
Jay, I had to use an FTP program. John
-
Steve, Not offended at all! Sure send another file over and I will take a look for you! John
