#Rekd™
-
Posts
2,925 -
Joined
-
Last visited
-
Days Won
48
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by #Rekd™
-
Hi Saipem, What phone number can I reach him at? Thank you
-
If you want a decent machine in the same era look at a used Hitachi-Seiki. No experience with Fadal's.
-
I am looking for a 30x16 machine (VMC) with 20"of Z travel as well if anybody has something close. I have contacted Doosan numerous times but little response.
-
Greg, As far as I know the "Surface Normals" are the green arrows, watch the direction they are pointing in. Click on the arrow to reverse. At least this is what I was taught at In-House. Good luck.
-
Thanks Ron! I will check it out on Monday!
-
This is what I have.
-
I have the MBD tab but nothing at the drop down that says Verisurf.
-
Hi Ron, Nothing new that I can see, yes I am the administrator of my desk top.
-
Hi Ron, I downloaded the file, thanks. What do I have to do after installing it? I closed X5Mu1 and restarted it and nothing new has been added. Thanks John
-
I have dual 23" dell ultra sharps here.
-
Wow, thanks for pointing this out. I will hang on to my 32bit machine.
-
Here is the pdf.
-
I have a pdf on how to undo it, email me.
-
What is the approx cost of this machine? Looks great!
-
Here is some old literature that I dug up, not sure if it is clear enough. Send me an email and I will email you the pdf, too large to attach. We only use High Speed Steel on our Macor, all manual machines for this stuff since it is prone to cracking and chipping. Good luck.
-
Anybody buying non-Sandvik Capto tools?
#Rekd™ replied to chris m's topic in Machining, Tools, Cutting & Probing
Mitsubishi is the cheapest around for tooling (I have found). -
I loaded some more files into the drawing directory. Coolloop Fluvirus Onefish Squid Solentararay Stevahedron Scooby
-
On the main forum page. http://www.emastercam.com/board/index.php?showtopic=65470&view=findpost&p=742028
-
I posted some files in the FTP under drawings. Bee Flower Sponge Bob
-
I have some files but I can't seem to load them on the FTP here. Send me an email Hockeyguyjohn (at) gmail (dot) com
-
Contact your reseller and they will help you.
-
Not sure if I am reading everything correctly or not....was the original topic complaining about Mastercam and the tool offsets (dia)? Sure a post modification will fix or help notify of a problem... but why should another program be needed to fix the problems with another?
-
Cleaning toolholder tapers
#Rekd™ replied to Pilot Plant Supervisor's topic in Machining, Tools, Cutting & Probing
Acetone is what we use here. -
Thanks Tom!
-
Quick question. Do they have Vericut for X5Mu1 in 64 bit?
