Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Just wondering if any body else has had problem with drill sorting in 2023
I have found that point to point doesn't even work..
any one else have same problem
Hello All,
Not sure how I turn there icon on , but I would like them to turn off
They come on when I push alt key down,
so every time I want to use shortcut key they pop up...
No problem Ron like I said before, all my tools came in a 2 weather they was .75 out of holder or 3.40 out of holder
in tool page edit, but in operation holder page it was the correct length it was in mcx-6,
I just thought I see both page the same number if tool page said 2 then holder page should say 2..imp
So I've just had something new happen to me,
I pull in an old mcx-6 file , that be running fine for year now..
thought I'd up grade it to 2022, and all my tools change to 2 out of holder in edit tool page
but in toolpath operation, at holder stated the correct out of holder from mcx-6.
Anybody else run in to this?
example:
Yes I agree it didn't happen in previous versions, like above I was told that it was a corrupted file and needed to
Regen default files but that only work for the initial start up of MC, and once I turn it off I could turn it back on..
Then I stumble across , this work around ..and it been working for me ...
The grove remind me of a o-ring grove, and if it is it's probably not very big or deep..
The first thought I had was maybe try 5x curve ...
just my 2 cent worth lol
Is there a way to back-up right click menu?
just in case it get changed , or clear out, to put it back
the way the operator had it before it got screwed up..
Has anybody else had their plane move on them..
The first time it happen I thought I must have click on wrong
lines, but it happening way to often .. I started lock my plane
once I've created them and have gotten around this issues,
but with the new ver on the horizon .. I'm wondering if it been fixed?
if anybody else know or has pointers on this subject pls. share with me..
Yes it happen to me on one job that had 25 different planes
I ended up locking the plane and it help to keep operation from changing planes on me
but It hasn't happen again, and it been 3-4 month now..
Yeah I have mind auto saving every 15 mins... and saving file really isn't a bad issuse
until i get the unexpected error message once that happen MC lockup and ypou can't do anything to it
but force close, and start up again..
Hello All,
has anybody seen this message before
I get it when I'm surface from top plane
now it doing muilt surfaces, but still all from top plane
As always thanx in advance for any help you may give
Ron
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.