Good luck....im still waiting to be able to select a different tool when you enable create additional op.............i guess im the only guy in the world who roughs with one size mill and finishs with a different size end mill

this a solids problem you got right.....you want chains to be flat and closed......no curvature onto other planes

Thats something, as long bridgeports been around and now there closing up

nxt?...when you post is this the file extention you get instead of .nc?

Are you looking to for example place an arc at a value?...you can just start typing the value and it will come up in the prompt area at the bottom of the screen....ex. X-2.,Y1.

Supposedly Bridgeport is really hurting from law suits stemming from there God awful DX32 controllers......so says one of there Eastern AE`s

What is it a model? code?

picture under your name

Try the Meta Cut Utilities www.metacut.com

Mine zooms fine.........you have your buttons programmed?.....I lock into pan zoom when i wanna zoom way in on something

Do you have the Integrex post?.........it put out Y`s #Y axis output and machining over part center: # 1) Output Y axis motion by setting mi10 to one in the parameter page. # and setting y_axis_mch to one. # 2) Set mi10 to one in a machine with no Y axis (y_axis_mch = 0) to force # linear/circular position moves in the XZ plane (g18). This allows # machining over the part center. #Caution: The machining must stay in the XZ plane at a Y fixed value # when y_axis_mch = zero because no C (other than the Tplane) or # Y positions are output!!! [ 08-27-2002, 11:24 AM: Message edited by: d0gFartz ]

Are you using the mpfadal2.pst?........i think that has rigid tapping in the drill cycle parameter page drop down where you select the cycle you wanna use

You want the programmed feed rate on the 4th axis correct?....see if your post has this block #Feedrate calculations pfcalc #Feedrate calculations, gcode 0 does not evaluate if gcode <> zero, [ if fmtrnd(cabs) = prvcabs | index, pfcalc_u_min else, [ #if cuttype = one & (cutpos2 <= one | cutpos2 = four), pfcalc_u_min #else, pfclc_deg_inv ] if ipr_type <> prv_ipr_type, prv_feed = c9k ] notice the pound sign on the if cuttype = one line and the else line a few below it....add them and it will spin at the programmed feed [ 08-23-2002, 10:48 AM: Message edited by: d0gFartz ]

You can read in the solid (with the solids addon) or the surfaces in mill lvl 1.If your reading UG files on an everyday basis the converter would be a good option.If your running V9 and you say the files are skewed im assuming you mean not on a normal plane in which case use your WCS

there confused

One hour of training on the use of it and including some example case files and anyone would love it

http://www.emastercam.com/patches/v9/ download hdd32.zip

You need to start off with the STL data from a scanner or digitizer to help control the accuracy,once in geomagic you can doll the file up even more

Change`em in your Screen,Configure,NC Settings

Ran into them yesterday.....there very weak on the cam side,like Dave said there more cad oriented i guess

See if in your post the do_full_arcs is turned on,sounds like that might be the problem,its new for v9 posts

Start handing out little bottles to pee in and see how many riders pass.Look at the police raids on the Giro d'Italia at San Remo when 20 teams...TEAMS got busted for stimulants, anabolic steroids and corticosteroids, as well as used syringes.Even five-time Tour winner Eddy Merckx once said that the Tour was not won on sandwiches and mineral water and the eventual admission of France's top rider Richard Virenque and team masseur Willy Voet confirmed it.He detailed the use of EPO, hormones, amphetamines, corticoids, steroids, testosterone and cocktails including heroin and cocaine. He described riders' efforts to avoid detection such as drips in hotel rooms to dilute their blood and the use of catheters to introduce clean urine into the bladder. The whole drug testing scenario in sports is a joke,its not "random" its "selective" testing. Just read where Raimondas Rumsas, the little known Lithuanian cyclist who placed third. His wife, Edita was caught with enormous amounts of products that included the injectable form of the performance-enhancing substance EPO and testosterone.Shes to appear before a judge in the eastern town of Bonneville on Tuesday. Makes you wonder what first and second place must be on......hmmm [ 07-29-2002, 06:42 PM: Message edited by: d0gFartz ]

Workoffset 6 is the first G54.1 P1 workoffset 7 is G54.1 P7 so on and so on

Yeh theres one available

Without any cord?........what brand is it?,mine is a Logitech 4000 FLX and the cable to the spaceball itself is built in and connects to the serial port,from what ive seen on www.3dconnexion.com the spaceball only comes in serial port connection....the space mouse you can get in USB