Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Leon82

Verified Members
 View Profile  See their activity

  • Posts

    2,208

  • Joined

  • Last visited

  • Days Won

    13

 Content Type 

Everything posted by Leon82

  1. Leon82
    I miss having that.
  2. Leon82
    You could make a sub program and program the feature incremental. But you can adjust to go by operation type and order. You would need one for each tool that has multiple ops to use the minimum tool changes and prevent feature jumping
  3. Leon82
    So you would transform the 2" and then do a rotate and ghost the transform 2" op out
  4. Leon82
    I have rotated translates and translated rotates. It works, just don't go crosseyed trying to follow it after your done
  5. Leon82
    personally i don't like negative depth facing. if the next time the stock is different it could wipe the jaw out or make the part ull. I would set off the bottom and start with the shortest piece
  6. Leon82
    when you have duplicate planes the t/c will jump back to the first one when you change the views. this has been like that for a while
  7. Leon82
    rough, flycut on 3m tape, finish. leave material for a final flycut if needed
  8. Leon82
    I'm doing something similar on our pc4. Base work offset is g54 I used g55 and 56 so rotate up on an angle to skew datum b which is under a lip. Then use system variables and math to add 90 degrees and write to 54c then rotate again to get b under the lip at 54 c0. Then back to 54 and get Tatum c. Datum a sits on 3 target point pins and there is a 4th match milled to prove for z. It's working really good.
  9. Leon82
    I'm pretty sure that was a star trek episode too.
  10. Leon82
    you may be able to use the high feed feature in the ops manager
  11. Leon82
    What happens when you do stuff on the PC? Mine will idle at 2.5 but once you move the mouse it goes up to 4+.
  12. Leon82
    It's called file repair now
  13. Leon82
    Ok, i made a 5 axis home plane .00001 different and it worked. and camplete didn't yell at me either so i think it will work like this.
  14. Leon82
    I would think it would be fine as long as they remember to rotate it. It's still a mechanical number It would have to omit the rotary moves to prevent an alarm for non existent axia
  15. Leon82
    We have the small lang. It works but you have to make a few facing passed to clear big pockets. The center doesn't really provide push because the blade isn't there. I put an approximate tool length in and tweak it as needed. It will suck loc lines into it and destroy itself if they are too close.
  16. Leon82
    it doesnt like the wcs im using. if i change all 3 planes to a different one it works. if i use the wcs i need and swap the tool and comp plane i get the error still. my wcs plane is 20mm above the system top plane.
  17. Leon82
    right click in op manager make tool list, cimco nc utilities make tool list camplete output
  18. Leon82
    Thanks, I will try tomorrow
  19. Leon82
    what does this mean in the debur path? I restarted the computer and it still does it
  20. Leon82
    I remember that back in the before time at my old shop. I think it was 5.5.
  21. Leon82
    the smaller tools seem to hold up better to me in some of the tougher materials
  22. Leon82
    I think it was the sleep settings. It must have screwed around with it because I had it on performance and it was switched back to balance
  23. Leon82
    have you tried clearing the solid history? save some is what i use for exporting
  24. Leon82
    the sleep was set so i turned that off. It has it set so the power settings need admin password. it makes updating stuff great because the boss has to type it in every time
  25. Leon82
    We have a server hasp. Only started with update 3. We've been on 2 for a few months now without any issues. They did upgrade e2 also. Maybe they changed a sever setting

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...