Leon82
-
Posts
2,193 -
Joined
-
Last visited
-
Days Won
12
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Leon82
-
mirror plain normal vector length must be greater than 0
Leon82 replied to Leon82's topic in Industrial Forum
it doesnt like the wcs im using. if i change all 3 planes to a different one it works. if i use the wcs i need and swap the tool and comp plane i get the error still. my wcs plane is 20mm above the system top plane. -
right click in op manager make tool list, cimco nc utilities make tool list camplete output
-
mirror plain normal vector length must be greater than 0
Leon82 replied to Leon82's topic in Industrial Forum
Thanks, I will try tomorrow -
what does this mean in the debur path? I restarted the computer and it still does it
-
I remember that back in the before time at my old shop. I think it was 5.5.
-
the smaller tools seem to hold up better to me in some of the tougher materials
-
I think it was the sleep settings. It must have screwed around with it because I had it on performance and it was switched back to balance
-
have you tried clearing the solid history? save some is what i use for exporting
-
the sleep was set so i turned that off. It has it set so the power settings need admin password. it makes updating stuff great because the boss has to type it in every time
-
We have a server hasp. Only started with update 3. We've been on 2 for a few months now without any issues. They did upgrade e2 also. Maybe they changed a sever setting
-
it seems to happen when the computer locks to the login screen automatically
-
one drive has never been logged into.
-
No, not that I know of. But I will check
-
we updated to update 3 and now if i leave the computer when i come back its at the restart recovery screen. it happens a few times a day. it doesn't seem to give a warning.
-
output M-code with angle for indexer
Leon82 replied to Doug Funny's topic in Post Processor Development Forum
That they way I would do it. Sometimes the indexer can be wired to accept angular comands from the machine -
its in the config settings under toolpaths there is a box for new and a box for existing
-
Internal tool has back cbore cutters. I believe I did some hand edits before we upgraded that advanced drill could do
-
It's in the holder section unless your trying to do something different
-
Tips on dynamic facing toolpath - single direction
Leon82 replied to ThickChips's topic in Industrial Forum
I did not look at your file but you could make a youuuge avoidance region and force it to cut one way i think -
Do you guys drill out corners where applicable
Leon82 replied to lowcountrycamo's topic in Industrial Forum
i had one drawing where they dimensioned the center of the .125 radii in the corners of the triangle pockets instead of wall intersections so i couldn't use much of the radius tolerance . i had to use a 6mm endmill for it. -
Tips on dynamic facing toolpath - single direction
Leon82 replied to ThickChips's topic in Industrial Forum
Can't you dynamic contour and put the extra stock allowance for the with of the cut. I forgot what the exact name was -
In Windows control panel there should be a Mastercam icon. There are a couple reset options for tool bars there. I wood try that.
-
I do. Step up comes in handy when you deal with ribs
-
I would use dynamic or pocket highspeed which ever is faster. I would try both high step over shallow cut and full depth light radial and see the time difference. then a separate zigzag finish pocket at final depth to get your floor finish.
-
That's what i do, then i make a stock model from job setup. it is usually faster this way for me
