DUM1
-
Posts
165 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by DUM1
-
feed rate plunge rate same on tool page / tool parameters page -
do you happen to have linearize helixes checked ?
-
edit trim break / trim drafting into lines
-
LOCK ICON LEFT SIDE TOOL MANAGER
-
you could use the home reference points to get the tool clear
-
IF YOU ARE IN MASTERCAM DESIGN TOOL PATH MANAGER WILL NOT WORK
-
WOW ,,I LIKES
-
YOURE NOT ALONE ! they finally quit asking me to help quote ...mostly ...
-
CONTOUR 3D AXIS SUB THUMBS UP
-
hope you got it already but any way I use a usb for the last 8 years on ours and I just post out a .EIA PROGRAM UP TO SEVEN NUMBERS LONG ...NO MORE, NO SYMBOLS ie. 167741.EIA /// have it in a folder on the usb label "newprog" or something no spaces or symbols. NEED ANY MORE HELP JUST ASK ILL SEE WHAT I CAN DO
-
I'm sure you already searched umc 750 , I did when we got ours not too long back . There's tons of good stuff to look at on this forum and just in case you don't already have it I attached the "app guide" that I received with the machine. good luck X9 HAAS UMC-750 5X MILL-AppGuide.pdf
-
did a little test program and it looks lide it could work ok ,,, have not tested it on the machine just kind of followed Colin's lead, good luck RIGHT ANGLE TEST.mcx-9
-
select the operations you want to change planes on left click edit selected operations edit common parameters and select the planes
-
have you tried to open/restore to previous version goto file left click properties ?
-
don't know how old your post is but ours was updated 5-20-16 from postability and works flawlessly
-
ALT F9?
-
when setting up another station I just copy the common folder " shared Mcam2018" and then a copy of my config to the new station and its usually pretty fast and painless
-
SPIRIAL TEST.MCX-6 MAYBE THIS WILL HELP
-
CLICKED CLOCKWISE
-
WELL NOW THATS COOL ! used to not be able to open more than one instance but now I can haven't tried for a long time . Thanks jlw
-
anyone else have 3 versions all up and running at the same time so you can program 3 4 or 5 parts at the same time ? I find myself using all three quite often to not have to open and close different programs all day while I'm going in and out of several different parts all through the day .... fun isn't it?
-
Just want to say I searched etiquette in this forum today because I wanted to see if I was the only one wondering the same things that have been previously discussed here many times . I recently looked and turns out there have a few downloads of stuff that I have posted and never heard a thanks or cool stuff or that's dumb or anything ... I love this forum and really appreciate all the help I have had just by reading a lot of the posts here, you guys are great ! and I would like to thank you for the knowledge you're passing on.
-
nice if you could ghost them or something , I have fought with them a few times too, started putting an extra group for the stock models
-
SO THE FILE NAME AND LOCATION ON THE TOOL LIST IS WHAT YOU'RE TRYING FOR? AFTER EDITING TEMPLATE YO NEED TO GO THROUGH THE CONFIG FILE AND DIRECT THE PATH TO THE NEW TEMPLATE RIGHT? TOOL LIST SAMPLE.docx
-
JUST A MASTERCAM THING I NOTICED .... A WAYS BACK
