Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I am currently using both for 2020 and have no issues opening solidworks files.
Are you refering to Mastercam stand alone version or MCFSW(MasterCam For SolidWorks)?
you will have to change line style to change dashed to solid, however this does not explain why your arcs(G2/G3) are a different line style to the 'G1' lines.
SO you are still considering cutting these in 1st op?
As mentioned by Gcode and myself, this will not be an easy feat.
You will not be able to gauge the thread. There will be more work needed to be done to cut the reverse taper. etc, etc, etc.
Some also recommend running a tapered endmill or reamer to give you the minor diameter taper and reduce the stress
on the upper portion of the threadmill.
You will have to do this thread from the other side, unless you happen to have a reverse taper thread mill that is.
in mastercam you can add a taper to the operation.
This I think depends on what version of Solidworks they are using, if it's anything later than 2018 or possibly even 2017 then MC 2018 won't be able to open them.
I rarely have issues opening Solidworks models in Mastercam, drag and drop or file open, the solid model always comes in.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.