Can someone tell me how to get rid of this??

[gcode]

I started working on a rev change on an old X2 file this morning

I brought it into X6 and started working... everything was going great

then an alarm started popping up when exiting toolpaths

"Assembly has changed"

 

it pops up on every op now and requires 2 or 3 clicks to clear it .... every time..

Sometime I have to click it twice just to change pages..

I'm not using holder collision checking either.. and never was..

[peon]

Happens often to me too gcode. In fact it behaves the same as it did in X5MU1 for me. Nothing you can do about it as far as I know.

[K2csq7]

How about "suppress associativity warning messages" under general settings of the toolpaths branch in the system configuration?

[mayday]

Nope, your stuck with it. I get them all the time. Sent it in to QC a long time ago. I call it an "enhancement". PC term for bug

[peon]

Be careful when that warning pops up. Now and then I noticed that the tools associated with that toolpath and other toolpaths may change without you knowing it.

[gcode]

I think I've gotten rid of it.

I'm using an undefined tool with no holder

defined.

I defined a tiny holder in up operation

that uses that tool and hit "update all ops ...."

so far so good

[mayday]

logged cnc00097022

BTW that was in May of 2011 when I sent it in.

Glad to see they overlooked it

[gcode]

logged cnc00097022

BTW that was in May of 2011 when I sent it in.

Glad to see they overlooked it

 

 

yeah... I've always stayed away from the holder page cause sooner or later that warning is going to come up

I guess I tried it in the old X2 file and 4 years later it bites me in the a$$.

 

I'm not getting the warning anymore, but I had to create a small dummy holder and add it to every op to get rid of it.

[neurosis]

I think I've gotten rid of it.

I'm using an undefined tool with no holder

defined.

I defined a tiny holder in up operation

that uses that tool and hit "update all ops ...."

so far so good

 

 

Yeap, thats what I do when I get that warning. Create a bogus tool holder just to shut the thing up.

[gcode]

sigh

[TheePres]

Gcode..check final NC code. Not only is pop-up annoying. It will also generate wierd tool sequencing in program.

[gcode]

the code's OK, it was just smash the keyboard to smithereens annoying after a while..

my lame workaround seems to be sticking though.. it hasn't come back

[neurosis]

I figured that this bug would have been fixed by now. What is this? two years later?

 

I still get this message constantly when using the Surface High Speed tool paths. Its very annoying.

[Thad]

I figured that this bug would have been fixed by now. What is this? two years later?

 

 

I reported to QC that keep tool down in depth cuts doesn't work in pocket remachining 10-ish years ago. Still doesn't work. It works in contour remachining, so that's what I've been using.

 

As far as annoying dialog boxes go, that's where A Form Filler comes into play. See my sig.

 

Thad

[crazy^millman]

Yes I love this pop up make me feel like I am justified in charging my customers hours extra for work.

[kostiuk]

What Thad said. A Form Filler is awesome.

 

Kevin K.

[Mick]

LOL. I've only had this warning once. But I could see it becoming very annoying for some.

[neurosis]

I rarely saw this error prior to X7. Not sure why I am seeing it so much now.

[JAMMAN]

Happens all the time to me in X6. I'm usually in a pickle when I see it and time constraints keeps me from figuring out a cure.

It does it to me even when there is a tool holder, I define a tool holder for every tool when I do blades because I have no other form of verification besides the one in mastercam.

[Gary]

This needs to stay at top and get a little attention. It really pisses me off when I click ok then have to go back and do it again. Its even more fun when I have it popping on second monitor.

[neurosis]

If it hasnt received much attention in over a two year span, I dont think that it is on top of the priority list.

[gcode]

This thread was started when I was working in X6.

I'm using holders extensively in X7 MU2 and they are working

well now. This popup behaves has it should now.

[GoetzInd]

I still get this message constantly when using the Surface High Speed tool paths. Its very annoying.

 

It is a lot better than it was in X6 but I am seeing the same thing. Still a problem in the SHS paths.

 

Mike