Leon82
-
Posts
2,205 -
Joined
-
Last visited
-
Days Won
13
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Leon82
-
we updated to update 3 and now if i leave the computer when i come back its at the restart recovery screen. it happens a few times a day. it doesn't seem to give a warning.
-
output M-code with angle for indexer
Leon82 replied to Doug Funny's topic in Post Processor Development Forum
That they way I would do it. Sometimes the indexer can be wired to accept angular comands from the machine -
its in the config settings under toolpaths there is a box for new and a box for existing
-
Internal tool has back cbore cutters. I believe I did some hand edits before we upgraded that advanced drill could do
-
It's in the holder section unless your trying to do something different
-
Tips on dynamic facing toolpath - single direction
Leon82 replied to ThickChips's topic in Industrial Forum
I did not look at your file but you could make a youuuge avoidance region and force it to cut one way i think -
Do you guys drill out corners where applicable
Leon82 replied to lowcountrycamo's topic in Industrial Forum
i had one drawing where they dimensioned the center of the .125 radii in the corners of the triangle pockets instead of wall intersections so i couldn't use much of the radius tolerance . i had to use a 6mm endmill for it. -
Tips on dynamic facing toolpath - single direction
Leon82 replied to ThickChips's topic in Industrial Forum
Can't you dynamic contour and put the extra stock allowance for the with of the cut. I forgot what the exact name was -
In Windows control panel there should be a Mastercam icon. There are a couple reset options for tool bars there. I wood try that.
-
I do. Step up comes in handy when you deal with ribs
-
I would use dynamic or pocket highspeed which ever is faster. I would try both high step over shallow cut and full depth light radial and see the time difference. then a separate zigzag finish pocket at final depth to get your floor finish.
-
That's what i do, then i make a stock model from job setup. it is usually faster this way for me
-
I get that if I try and tap with a drill or a spot drill.
-
Advanced drill should be able to do this
-
Sounds like you chained some that are a little lower and using incremental depths
-
Ok I'll check the book
-
Where is the file that saves the Context Menu? (Right Mouse Click)
Leon82 replied to BilKo Tool's topic in Industrial Forum
docs, mymastercam2023,config folder has the workspace file -
our dealer did this with a post for our feeler pallet. it was done with a flag when m62 is put in the manual entry to signify pallet 2 it switches output to m62 for each tool change this is to prevent misoperation. you have to try hard to run the wrong pallet this is a snippet of the tool change block if pallet_flg = 1, pbld, n$, "M62", "(PALLET B)", e$ else, pbld, n$, "M61", "(PALLET A)", e$
-
There is a line if1021=1goto300 Return from mc in the 9002macro. It's on that line I think when it empties the machine when I try a quick dwell program
-
The date is 2 2022. None of the pallets are set to continuous. Coolant 112is the alarm https://postimg.cc/zH7KmSBP
-
35v It's brand new. I can grab the date tomorrow. Yes it's not in standby mode as far as I know the program #1 ends. It shuts down and then the automatic timer starts the machine back up. Our other 35v never leaves the machine empty. If I turn the coolant neglect button on I can run the warm-up program while it's empty
-
after the last pallet in the que is run it puts it in the pallet rack leaving the machine empty. it gives an alarm about coolant I'm guessing because the draw mechanism is exposed
-
Is it a simple parameter or is it more involved? It's preventing the auto warmup
-
WHen i do it it is G43.4 otherwise it would have to be perfectly aligned to the center of rotation
-
Can you rotate incremental? It's good if you want to surface something on 3+2 Nevermind, I'm thinking of plane from gview
