Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
You can probably call the dealer to transfer the physical hasp.
But if you got a hasp from your new version and have the old one I suppose you can hand it to some one as long as you don't violate any itar regulations.
It came with a 6mm ball we had a 2 mm probe from our other machine and I tried it out.
I calibrates fine and seems to perform ok. I slowed down the feed in the settings program just to be safe.
This is almost always caused by the gouge check shortening your lead in because it was too long or the radius was too big or in certain cases when you chain an arc it can happen.
No problem.
Contour is good if you have a straight line cut so you can take advantage of the micro lift and back feed or if you have equal stock on all sides.
Posted out a circle mill and got an error during posting. It said arc converted to line, contact your reseller.
But I dug deeper and realised I had an over lap and spring passes. Removing the overlap fixed it.
On pocket cycle you get a warning about spring passes not being output because of an overlap when the path is generated.
That cycle is called fine bore shift and there is a shift value field.
There are parameters in the control of the machine also that change the shift direction so verify it shifts the correct way above the hole
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.