shazam/TPP
-
Posts
510 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by shazam/TPP
-
o/t problem with youtube
shazam/TPP replied to Jeremy Herron@DBS Solutions™'s topic in Industrial Forum
was that on a fadal machine? by the looks of the spindle it is. -
when you use edit, simplify try increasing your tolerance until the spline turns into an arc. i've had to go up to .002 hth
-
glad we can be of help
-
-
i agree with JP
-
That's it!! i'll have to analyze the machine build, i also started mirroring the stl files but the rotary table still ended up on the left but i got the spindle pointing to the left. i was partially there at least. thank you Derek
-
worst case, uninstall both version and reload version 6
-
make sure in your system config file...start/exit the cimco you chose points to the right directory. i don't use the cimco that came with MC so i chose other and browsed to the correct directory. hth
-
try uninstalling cimco edit5, maybe there is a conflict with ver 6?
-
Ron, i'm looking for a fadal 4020 with the A axis along X axis on the right with spindle pointing to the left. thanks
-
bump
-
what if you install it in the program files directory like MC? i have it on my system but it's XP 32 bit with no problems.
-
+1, Maybe try loading an existing file that was migrated and post it and compare to the original gcode. also when you install X5 keep X4 MU3 on your system in case you feel frustrated with X5. hth
-
on a 4 axis vertical machining center, how do you place the A axis on the right side of the table (X+ end) with the nose pointing to the X- end?
-
for the arc filter try this go into start/all programs/Mastercam x5/mcamx control panel applet, then to toolpath support, new arc filter turn on to enabled. hth
-
I'm guessing cnc combined multiaxes with advanced multiaxis? i did a quick search and didn't find anything. just finishing my install and updating my operation defaults and noticed this. thanks in advance
-
^^
-
CGS Ferocious end mills, they're carbide hi-helix. Ferocious
-
Really, that's hard to believe
-
i use the mpmaster, free on here. also check your machine def.
-
would it be possible to add a link to the industrial forums like the link in off topic that goes to memorial posts? just a thought
-
+1 to using the favorites folder
-
i asked this question last week, here is the link FTP.mastercam-cadcam.com
-
what Rick said, and when you simplify you may have to up your tolerance so it will convert to an arc
-