ajmer
-
Posts
501 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by ajmer
-
no problem
-
in 2020 you can turn of that annoying behaviour
-
Take a look at this file IHS_DWG_00005074_OGS_FINAL_SPRIAL.mcam
-
Mostly done in extensive upgrade in our use of Mastercam
ajmer replied to sharles's topic in Industrial Forum
Very impressive -
turn off depth cuts and it works on my computer
-
RIGHT CLICK IN THE OPERATIONS MANAGER SELECT THEN PUT YOUR TOOL NUMBER IN AND IT WILL SELECT ALL THE OPERATIONS THAT USE THAT TOOL OOPS SORRY FOR CAPS LOCK
-
check your misc values in the copied operation
-
Very nice!!
-
Why might Mastercam tool library load 280 tools instead of usual 427?
ajmer replied to Michael K's topic in Educational Forum
Make sure there aren't any filters on when you select the tools -
Or use model prep and pull the diameters to the correct mid tolerance values you want.
-
hey Tyler, long time no talk.
-
i added collision check and removed extend tool to infinity its not gouging now but it does a wierd move Sample.mcam
-
try this open a new tool path nesting click the exclamation mark then do your nesting operations
-
GENERIC HAAS VF-TR_SERIES 5X MILL POST SET-UP
ajmer replied to cncmillman's topic in Industrial Forum
open the pst file look for this brk_mv_head : 1 #Break the 5 axis moves to remove gouge and change to this brk_mv_head : 0 #Break the 5 axis moves to remove gouge -
You have to initialize the variable Add this somewhere near the top of the post, it needs this for it to work. Or look for other initilized variable and put it on a line by itself macroprogno : 0
-
Hit the space bar and the box should pop up
-
Check your misc values 1 of them is making it retract between passes
-
in the verify tab go to file options make sure that it is set to always use 5 axis engine
-
try making the step up the same as the step down that should take a pass at all the flat areas
-
Issue with Milltronics Centurion 7 and mastercam
ajmer replied to calexan's topic in Educational Forum
you will have to repeat the X and Y position on the G83 etc line N49 T3 M6 N50 G0 G90 G54 X-6.3706 Y1.9734 A0. S900 M3 N51 G43 H3 Z1. M8 N52 G98 G83 X-6.3706 Y1.9734 Z-2.9 R.1 Q.25 F1. N53 Y.9547 N54 Y-2.5492 N55 Y-3.5679 N56 X-2.0199 not sure what post you are using but most posts have this line force_dpts : no$ #Force XY output on all drilling lines including cycle call? change to yes$ -
it is probably the language that windows is using check to see if it is using Canada English or Us english open the pst file of the one that is causing you grief search for language in the file change the Ca to US or the US to CA in the offending file save the file then reload the machine def
-
take a look at this file I used the 2 rail method that leigh mentioned I did it in 2018 so I saved it as a step aswell ajmer_ihs_rotary die.stp ajmer_ihs_rotary die.mcam
-
the lines are there because you have stock set to wireframe. it will show you those lines because it is an stl file if you don't want to see them change to solid or uncheck display
-
Thin walls getting turned on in Extrude solid for no reason?
ajmer replied to crazy^millman's topic in Industrial Forum
I think thin wall gets turned on when you pick an open chain to extrude -
also make sure that use 5 axis is set in the options of the simulator
